Tag Archives: AIAA

12Nov/18
FOD Prevention Banner

FAASafety.gov, (Follow Procedures The Buck Stops Here) Safety Course

FAASafety.gov  (Follow Procedures The Buck Stops Here) Safety Course The minimum compliance standard in aviation is zero violations. However, while industry personnel understand the importance of using and following written technical procedures; notRead More…

24Oct/18

EASA sets new safety goal 2018

The European Aviation Safety Agency (EASA) has set a new objective for helicopter safety in its jurisdiction – a 50 percent improvement within the next 10 years. While that goal has yetRead More…

02Oct/18

Auxiliary Power Unit Battery Fire 2013

Original post courtesy of NTSB.gov on January 7, 2013 Executive Summary On January 7, 2013, about 1021 eastern standard time, smoke was discovered by cleaning personnel in the aft cabin of aRead More…

25Sep/18

FOD Incident Rotor Blade Tool Control

Original post courtesy of Aerossurance.com on May 19, 2016 The Australian Transport Safety Bureau (ATSB) has just issued a report on an incident where a helicopter’s rotor blades were damaged during start up byRead More…

31Aug/18

Screwdriver Found in C208 Controls

Original post courtesy of Aerossurance.com on Feb 12, 2017 Flying Control FOD: Screwdriver Found in C208 Controls An Australian Cessna 208B Caravan pilot detected a control restriction during a flight control riggingRead More…